Fluke 1630-2FC Earth Ground Loop and Leakage Clamp 1000V

Fluke 1630-2FC Earth Ground Loop and Leakage Clamp 1000V

Product Description

Fast and safe, this earth-ground clamp measures indoor/outdoor earth-ground resistance and ac leakage currents without
disconnecting the earth-ground stake from the grounding system. In addition, this clamp features a heavy-duty clamp jaw that stays in alignment and calibration in industrial conditions.

Fluke 1630-2FC Earth Ground Loop and Leakage Clamp 1000V factory

EARTH GROUND LOOP AND LEAKAGE CLAMP
* Earth ground ac leakage current measurement - Identify ac leakage currents without disconnecting the earth ground stake from the grounding system–ideal for system troubleshooting
* Rugged - Heavy-duty clamp jaw stays in alignment and in calibration even in every day, on-the-job industrial environments
* Logging measurements - The earth ground clamp saves time by automatically recording data at pre-set intervals and saves up to 32,760 measurements in memory at the set logging interval. Saves time by recording and storing measured values
* Alarm threshold - User-defined high/low alarm limits, for rapid measurement evaluation
* Band-pass filter - Selectable band-pass filter function

Fluke 1630-2 FC - Earth Ground Loop and Leakage Clamp

* Rugged - Heavy-duty clamp jaw stays in alignment and in calibration even in every day, on-the-job industrial environments
* Logging measurements - The earth ground clamp saves time by automatically recording data at pre-set intervals and saves up to
32,760 measurements in memory at the set logging interval. Saves time by recording and storing measured values
* Alarm threshold - User-defined high/low alarm limits, for rapid measurement evaluation
* Band-pass filter - Selectable band-pass filter function removes unwanted noise from the ac leakage current measurement

The Fluke 1630-2 FC Stakeless Earth Ground Clamp is the kind of high-quality, rugged tool you expect from Fluke. Heavy-duty clamp jaw stays in alignment and in calibration even in every day, on-the-job industrial environments.

Specification

Maximum Voltage to Earth Ground	1000 V
Frequency Range	40 Hz to 1 kHz
Ingress Protection	IEC/EN 60529: IP30 with jaw closed
LCD	Digital reading: 9999 counts Refresh rate: 4/s
Overload Indication	OL
Display Reading Specification with Loop Resistance Standard	Input: 0.474 Ω, Minimum: 0.417, Maximum: 0.531 Input: 0.5 Ω, Minimum: 0.443, Maximum: 0.558 Input: 10 Ω, Minimum: 9.55, Maximum: 10.45 Input: 100 Ω, Minimum: 96, Maximum: 104
Data Logging	Capacity: Minimum of 32,760 measurements Interval: 1 second to 59 minutes and 59 seconds
Wireless Radio	Frequency range: 2412 to 2462 MHz Output power: <10 mW Radio frequency certification: FCC ID:T68-FBLE IC:6627A-FBLE
Safety	General: IEC/EN 61010-1: Pollution Degree 2 IEC/EN 61557-1 Measurement: IEC/EN 61010-2-032: CAT IV 600 V / CAT III 1000 V
Current Clamp for Leakage Current Measurements	IEC/EN 61557-13: Class 2, ≤30 A/m
Resistance to Earth	IEC/EN 61557-5
Effectiveness of The Protective Measures	IEC/EN 61557-16: cutoff frequency 20 kHz (-3 dB)
Electromagnetic Compatibility (EMC)	International: IEC/EN 61326-1: Portable Electromagnetic Environment CISPR 11: Group 1, Class B, IEC/EN 61326-2-2 Korea (KCC): Class A equipment (Industrial Broadcast and Communications Equipment) USA (FCC): 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103
Conductor Size	1.57" (40 mm) approximately
Temperature	Operating: 14 to 122°F (-10 to 50°C) Storage: -4 to 140°F (-20 to 60°C) Reference: 73°F ±9°F (23°C ±5°C) Coefficient: 0.15% X (specified accuracy)/°C (<64.4°F or >82.4°F [<18°C or >28°C])
Operating Humidity	Non condensing: <50°F (<10°C) ≤90% RH at 50 to 86°F (10 to 30°C) ≤75% RH at 86 to 104°F (30 to 40°C) ≤45% RH at 104 to 122°F (40 to 50°C) (Non condensing)
Altitude	Operating: 6561' (2000 m) Storage: 39370' (12,000 m)
Battery	Type: 4 x 1.5 V AA alkaline IEC/EN LR6 Life: More than 15 hours (In ground resistance measurement mode, with backlight turned off, and RF mode turned off)
Dimensions	11.1 x 4.1 x 1.9" (283 x 105 x 48 mm)
Weight	31 oz (880 g)

Packing & Delivery

Fluke 1630-2FC Earth Ground Loop and Leakage Clamp 1000V details

Fluke 1630-2FC Earth Ground Loop and Leakage Clamp 1000V manufacture

Company Profile

As an important international instrument sales platform, our company has the authorization qualifications of many international first-line brands. Relying on the advanced digital information management platform and international procurement platform, we provide more than 100,000 instruments, industrial MRO products, industrial products and spare parts to global customers. Our business scope: industrial testing, non-destructive testing, gas testing, electrical testing, laboratory testing, water quality testing, environmental testing, medical testing... So far, we have become an important partner of many global top 500 companies and well-known local Chinese companies. Create an efficient supply chain system to provide customers with strong supply guarantee.