Fluke 1732 Three-Phase Electrical Energy Logger with Current Probes

Fluke 1732 Three-Phase Electrical Energy Logger with Current Probes

Product Description

Designed to find sources of electrical energy waste, which allows the user to locate when and where energy in your facility is being consumed; from the service entrance to individual circuits. Additionally, the Energy Analyze software package allows users to compare multiple data points over time and comes with current probes.

Fluke 1732 Three-Phase Electrical Energy Logger with Current Probes supplier

Fluke 1732/EUS Three-Phase Energy Logger with Fluke Connect Compatibility and Flexible Current Probes
* EU/US Version Three-Phase Electrical Energy Logger (includes current probes)
* Energy studies: Full range of electrical power and energy parameters
* Load studies: Simple current only logging for load sizing
* Comprehensive logging: More than 20 separate logging sessions can be stored on the instruments
* Optimized user interface: Quick, guided, graphical setup ensures you’re capturing the right data every time, and the
intelligent verification function indicates correct connections have been made, reducing user uncertainty
* Bright, color touch screen: Perform convenient in-the-field analysis and data checks with full graphical display
* Optimized user interface: Capture the right data every time with quick, guided, graphical setup and reduce

FLuke 1732 - Three-Phase Electrical Energy Logger

* Automatically capture and log voltage, current, power, power factor, energy and associated values
* Power instrument directly from the measured circuit
* 600V CAT IV/1000V CAT III rated for use at the service entrance and downstream

The new Fluke 1732 and 1734 Three-Phase Electrical Energy loggers introduce a new simplicity to discovering sources of electrical energy waste. Discover when and where energy in your facility is being consumed; from the service entrance to individual circuits. Access and share data remotely with your team via the Fluke Connect® app so you can maintain safer working distances and make critical decisions in real-time, reducing the need for protective equipment, site visits and check-ins.

Profiling energy usage across your facility helps you identify opportunities for energy savings, and provides you with the data you need to act on them. The new Energy Analyze software package allows you to compare multiple data points over time to build a complete picture of energy usage, which is the first step to reduce the cost of your energy bill.

Fluke 1732 Three-Phase Electrical Energy Logger with Current Probes details

Specification

Voltage
Range	1000 V
Resolution	0.1 V
Intrinsic Accuracy at Reference Conditions (% of Reading +% of Full Scale)	±(0.2% + 0.01%)
Current: Direct Input i17xx-flex 1500 12"
Range	150 A 1500 A
Resolution	0.1 A 1 A
Intrinsic Accuracy at Reference Conditions (% of Reading +% of Full Scale)	±(1% + 0.02%) ±(1% + 0.02%)
Current: Direct Input i17xx-flex 3000 24"
Range	300 A 3000 A
Resolution	1 A 10 A
Intrinsic Accuracy at Reference Conditions (% of Reading +% of Full Scale)	±(1% + 0.03%) ±(1% + 0.03%)
Current: Direct Input i17xx-flex 6000 36"
Range	600 A 6000 A
Resolution	1 A 10 A
Intrinsic Accuracy at Reference Conditions (% of Reading +% of Full Scale)	±(1.5% + 0.03%) ±(1.5% + 0.03%)
Current: Direct Input i40s-EL Clamp
Range	4 A 40 A
Resolution	1 mA 10 mA
Intrinsic Accuracy at Reference Conditions (% of Reading +% of Full Scale)	±(0.7% + 0.02%) ±(0.7% + 0.02%)
Frequency
Range	42.5 to 69 Hz
Resolution	0.01 Hz
Intrinsic Accuracy at Reference Conditions (% of Reading +% of Full Scale)	±(0.1%)
Auxillary Input
Range	±10 V dc
Resolution	0.1 mV
Intrinsic Accuracy at Reference Conditions (% of Reading +% of Full Scale)	±(0.2% + 0.02%)
Voltage Min/Max
Range	1000 V
Resolution	0.1 V
Intrinsic Accuracy at Reference Conditions (% of Reading +% of Full Scale)	±(1% + 0.1%)
Current Min/Max
Range	Defined by accessory
Resolution	Defined by accessory
Intrinsic Accuracy at Reference Conditions (% of Reading +% of Full Scale)	±(5% + 0.2%)
THD on Voltage
Range	1000%
Resolution	0.1%
Intrinsic Accuracy at Reference Conditions (% of Reading +% of Full Scale)	±0.5
THD on Current
Range	1000%
Resolution	0.1%
Intrinsic Accuracy at Reference Conditions (% of Reading +% of Full Scale)	±0.5
Power Supply
Voltage Range	100 to 500 V using safety plug input when powering from the measurement circuit 100 to 240 V using standard power cord (IEC 60320 C7)
Power Consumption	Maximum 50 VA (max. 15 VA when powered using IEC 60320 input)
Efficiency	≥68.2% (in accordance with energy efficiency regulations)
Maximum No-Load Consumption	≤0.3 W only when powered using IEC 60320 input
Mains Power Frequency	50/60 Hz ±15%
Battery	Li-ion 3.7 V, 9.25 Wh, customer-replaceable
On-Battery Runtime	Four hours in standard operating mode, up to 5.5 hours in power saving mode
Charging Time	<6 hours
Data Acquisition
Resolution	16-bit synchronous sampling
Sampling Frequency	10.24 kHz at 50/60 Hz, synchronized to mains frequency
Input Signal Frequency	50/60 Hz (42.5 to 69 Hz)
Circuit Types	1-φ, 1-φ IT, Split phase, 3-φ delta, 3-φ wye, 3-φ wye IT 3-φ wye balanced, 3-φ Aron/Blondel (2-element delta) 3-φ delta open leg, Currents only (load studies)
Data Storage	Internal flash memory (not user replaceable)
Memory Size	Typical 10 logging sessions of 8 weeks with 1-minute intervals and 500 events
Basic Interval
Measured Parameters	Voltage, current, aux, frequency, THD V, THD A, power, power factor, fundamental power, DPF, energy
Averaging Interval	User selectable: 1 sec, 5 sec, 10 sec, 30 sec, 1 min, 5 min, 10 min, 15 min, 30 min
Averaging Time Min/Max Values	Voltage, Current: Full cycle RMS updated every half cycle Aux, Power: 200ms
Demand Interval (Energy Meter Mode)
Measured Parameters	Energy (Wh, varh, VAh), PF, maximum demand, cost of energy
Interval	User selectable: 5 min, 10 min, 15 min, 20 min, 30 min, off
Standards Compliance
Power	IEEE 1459
Interfaces
USB-A	File transfer via USB flash drive, firmware updates max. current: 120 mA
WiFi	File transfer and remote control via direct connection or WiFi infrastructure
USB-Mini	Data download device to PC
Voltage Inputs
Number of Inputs	4 (3 phases and neutral)
Maximum Input Voltage	1000 Vrms, CF 1.7
Input Impedance	10 MΩ
Bandwidth (-3 dB)	42.5 Hz to 3.5 kHz
Scaling	1:1 and variable
Measurement Category	1000 V CAT III/600 V CAT IV
Current Inputs
Number of Inputs	3, mode selected automatically for attached sensor
Input Voltage	Clamp input: 500 mVrms/50 mVrms; CF 2.8
Rogowski Coil Input	150 mVrms/15 mVrms at 50 Hz, 180 mVrms/18 mVrms at 60 Hz; CF 4; all at nominal probe range
Range	1 A to 150 A/10 A to 1500 A with thin flexible current probe i17XX-flex1500 12" 3 A to 300 A/30 A to 3000 A with thin flexible current probe i17XX-flex3000 24" 6 A to 600 A/60 A to 6000 A with thin flexible current probe i17XX-flex6000 36" 40 mA to 4 A/0.4 A to 40 A with 40 A clamp i40s-EL
Bandwidth (-3 dB)	42.5 Hz to 3.5 kHz
Scaling	1:1 and variable
Auxiliary Inputs
Number of Inputs	2
Input Range	0 to ±10 V dc, 1reading/s
Scale Factor	Format: mx + b (gain and offset) user configurable
Displayed Units	User configurable (7 characters, for example, °C, psi, or m/s)
Wireless Connection
Number of Inputs	2
Supported Modules	Fluke Connect® 3000 series
Acquisition	1 reading/s
Environmental Specifications
Operating Temperature	14 to 122 °F (-10 to 50°C)
Storage Temperature	-4 to 140°F (-20 to 60°C) With battery: -4 to 122 °F (-20 to 50°C)
Operating Humidity	50 to 86°F (10 to 30°C) max. 95% RH 86 to 104°F (30 to 40°C) max. 75% RH 104 to 122°F (40 to 50 °C) max. 45% RH
Operating Altitude	6561.7' (2000 m) [up to 13,123.4' (4000 m) derate to 1000 V CAT II/600 V CAT III/300 V CAT IV]
Storage Altitude	39,370' (12,000 m)
Enclosure	IP50 in accordance with EN60529
Vibration	MIL-T-28800E, Type 3, Class III, Style B
Safety	IEC 61010-1 IEC Mains Input: Overvoltage Category II, Pollution Degree 2 Voltage Terminals: Overvoltage Category IV, Pollution Degree 2 IEC 61010-2-031: CAT IV 600 V / CAT III 1000 V
Electromagnetic Compatibility	EN 61326-1: Industrial CISPR 11: Group 1, Class A Korea (KCC): Class A Equipment (industrial broadcasting and communication equipment) USA (FCC): 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103
Temperature Coefficient	0.1 x accuracy specification/°C
General Specifications
Color LCD Display	4.3" (109 mm) active matrix TFT, 480 pixels x 272 pixels, resistive touch panel
Dimensions	Instrument: 7.8 x 6.6 x 2.2" (198 x 167 x 55 mm) Power supply: 5.1 x 5.1 x 1.8" (130 x 130 x 45 mm) Instrument with power supply attached: 7.8 x 6.6 x 3.5" (198 x 167 x 0.9 mm)
Weight	Instrument: 2.5 lbs (1.1 kg) Power supply: 0.9 lb (400 g)

Packing & Delivery

Company Profile

Fluke 1732 Three-Phase Electrical Energy Logger with Current Probes factory

As an important international instrument sales platform, our company has the authorization qualifications of many international first-line brands. Relying on the advanced digital information management platform and international procurement platform, we provide more than 100,000 instruments, industrial MRO products, industrial products and spare parts to global customers. Our business scope: industrial testing, non-destructive testing, gas testing, electrical testing, laboratory testing, water quality testing, environmental testing, medical testing... So far, we have become an important partner of many global top 500 companies and well-known local Chinese companies. Create an efficient supply chain system to provide customers with strong supply guarantee.