Fluke 726 Precision Multifunction Process Calibrator Fluke 725

Fluke 726 Precision Multifunction Process Calibrator Fluke 725

Product Description

Designed specifically for the process industry, this precision multifunction process calibrator tests sensors and valves, and test and calibrate transmitters. Additionally, it interprets information without a calculator and stores up to 8 calibration results in memory for later analysis.

Fluke 726 Precision Multifunction Process Calibrator Fluke 725 details

Fluke 726 Precision Multifunction Process Calibrator
* More precise measurement and calibration source performance, accuracies of 0.01%.
* Two separate channels; measure, source and view process signals simultaneously
* Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
* Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters
* Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
* Source mA with simultaneous pressure measurement to conduct valve and I/P tests
* Integrated pressure switch test allows you to capture the set, reset and deadband of a switch
* Memory storage for up to 8 calibration results, return

Features
* More precise measurement and calibration source performance, accuracies of 0.01%
* Transmitter error% calculation, interpret calibration results without a calculator
* Memory storage for up to eight calibration results, return stored calibration data from the field for later analysis
* Frequency totalizer and frequency pulse train source mode for enhanced flowmeter testing
* HART mode inserts 250 Ω resistor in mA measure and source for compatibility with HART instrumentation
* Integrated pressure switch test allows you to capture the set, reset, and deadband of a switch
* Custom RTD curves, add calibration constants for certified RTD probes for enhanced temperature measurement
* Voltage input protection design for improved reliability
* Two separate channels; measure, source and view process signals simultaneously
* Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
* Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters
* Measure or source pressure using any of 29 Fluke 700Pxx pressure modules (pressure pump required)
* Source mA with simultaneous pressure measurement to conduct valve and I/P tests
* Perform fast linearity tests with auto-step and auto-ramp features
* Power transmitters during test using 24 V loop supply and simultaneous mA measurement
* Store frequently-used test setups for later use

FLUKE 726 - Precision Multifunction Process Calibrator

* More precise measurement and calibration source performance, accuracies of 0.01%.
* Two separate channels; measure, source and view process signals simultaneously
* Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
* Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters
* Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules

The Fluke 726 Precision Multifunction Process Calibrator is designed specifically for the Process industry with broad workload coverage, calibration power and unsurpassed accuracy in mind. The 726 measures and sources almost all process parameters and can calibrate almost anything. The 726 will also interpret results without the help of a calculator and store measurement data for later analysis.

The Fluke 726 Multifunction Process Calibrator (referred to as “the Calibrator”) is a handheld, battery-operated instrument that measures and sources electrical and physical parameters. See Table 1.

What's included with the Fluke 726
* Process Calibrator
* NIST-Traceable Calibration Report and Data
* Test Leads
* Stackable Test Leads
* Alligator Clips
* Quick Reference Guide

Specification

Measurement Accuracy
Voltage DC	30 V: 0.01% + 2 mV (upper display) 20 V: 0.01% + 2 mV (lower display) 90 mV: 0.01% + 10 µV -10 to 75 mV: 0.025% + 1 count (via TC connector)
Current DC	24 mA: 0.01%+ 2 mA
Resistance	0 to 4000 Ω: ±0.015%
Frequency	2 to 1000 CPM: 0.05% + 0.1 CPM 1 to 1000 Hz: 0.05% + 0.1 Hz 1 to 15 kHz: 0.05% + 0.01 kHz Sensitivity: 1 V peak-to-peak-minimum
Pressure	Accuracy from 0.025% of range using any of 29 pressure modules Modules available for differential, gauge, vacuum, absolute, dual and high pressure
Source Accuracy
Voltage DC	100 mV: 0.01% + 10 µV 20 V: 0.01% + 2 mV -10 to 75 mV: 0.025% + 1 count (via TC connector)
Current DC	24 mA (source): 0.01% + 2 µA 24 mA (simulate): 0.01% + 2 µA
Resistance	Range, accuracy (percent of reading + floor) and excitation current 5 to 400 Ω, 0.015% + 0.1 Ω, 0.1 to 0.5 mA 5 to 400 Ω, 0.015% + 0.05 Ω, 0.5 to 3 mA 400 to 1500 Ω, 0.015% + 0.5 Ω, 0.05 to 0.8 mA 1500 to 4000 Ω, 0.015% + 0.5 Ω, 0.05 to 0.4 mA
Frequency	2 to 1000 CPM: 0.05% 1 to 1000 Hz: 0.05% 1 to 10 kHz: 0.25% 10 to 15 kHz: 0.5% Waveform: 5 V p-p squarewave, -0.1 V offset
RTDs and Thermocouples
Measure and Source Accuracy	Cu10: 1.8°C NI-120: 0.15°C PT-100 (385): 0.45°C PT-100 (392): 0.35°C PT-100 (391-JIS): 0.35°C PT-200 (385): 0.95°C PT-500 (385): 0.55°C PT-1000 (385): 0.35°C RTD resolution: 0.01°F (0.01°C) Cu10.01 C: 0.1°F (0.1°C) J: 0.4°C K: 0.5°C T: 0.4°C E: 0.4°C R: 1.4°C S: 1.4°C B: 1.4°C L: 0.45°C U: 0.45°C N: 0.6°C XK: 0.4°C BP: 1.1°C TC resolution: J, K, T, E, L, N, U: 0.1°C, 0.1°F B, R, S: 1°C, 1°F
Functions
Ramp	Source functions: Voltage, current, resistance, frequency, temperature Ramps: Slow ramp, fast ramp, 25% step-ramp
Loop Power	Voltage: 24 V Accuracy: 10% Maximum current: 22 mA, short circuit protected
Step	Source functions: Voltage, current, resistance, frequency, temperature Steps: 25% of range, 100% of range
General Specifications
Environmental	Operating temperature: 14 to 131°F (-10 to 55°C) Storage temperature: -4 to 159.8°F (-20 to 71°C) Operating altitude: 9842.5' (3000 m)
Agency Approvals	EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992
Battery	Type: 4 x AA alkaline batteries Replacement: Separate battery compartment, accessible without breaking calibration seal
Side Port Connections	Pressure module connector, also used for remote real-time programming
Dimensions	7.9 x 3.8 x 1.9" (200 x 96 x 47 mm)
Weight	23 oz (650 g)

Packing & Delivery

Fluke 726 Precision Multifunction Process Calibrator Fluke 725 manufacture

Fluke 726 Precision Multifunction Process Calibrator Fluke 725 supplier

Company Profile

As an important international instrument sales platform, our company has the authorization qualifications of many international first-line brands. Relying on the advanced digital information management platform and international procurement platform, we provide more than 100,000 instruments, industrial MRO products, industrial products and spare parts to global customers. Our business scope: industrial testing, non-destructive testing, gas testing, electrical testing, laboratory testing, water quality testing, environmental testing, medical testing... So far, we have become an important partner of many global top 500 companies and well-known local Chinese companies. Create an efficient supply chain system to provide customers with strong supply guarantee.